Cold repair glue is now widely used in the maintenance of inner tire. Cold patching glue made it easy to fix tires. Everyone could do it. Now we are going to explain how to fix a tire with cold patching glue.

1 in the repair of the tire, our first step must first find where the tire is broken, you can take a basin, which contains half a basin of water.

2. Then use a pump to pump air into the inside of the tire, filling it up as you normally would, so you can look for any damage.

3. Then, put part of the tire in the water to see if there are any bubbles. Rotate the tire so that all parts of the tire can be checked.

4. Then, make a mark or gently drive a small nail into the hole or hole you find.

5. Next, polish the hole with a file to remove the dust from the surface, but do not over-polish it. The purpose is to prevent the dust from affecting the bonding effect.

6. Then apply the cold patching glue to the polishing area. When the glue is almost dry, stick the film on again.

7. When pasting the film, be careful to paste it once. If the same piece is pasted a second time, it will not stick.